Materials:
• Anabel Alpina yarn and an analogue of Lily Vita Cotton in beige, red and white colors and a 2.5 mm hook,
• White yarn Crumb or Softy for a pompom and a 3-3.5 mm hook,
• thinner yarn for a muzzle in white (Lily Alpina) and a matching hook (I have 1.6 mm), black threads, a needle, scissors,
• 8 mm half-bead eyes and glue,
• pink blush and a cheek brush.

Bear size: about 11 cm.

Legend:
VP – air loop;
sbn – single crochet;
pr – increments (two sc from one loop);
ub – decreases;
ss – connecting column or half-column without crochet;
x n – repeat n times.
All parts are connected in a spiral (except for the nose).

Head
1p. – 6 sc in the amigurumi ring (6)
2p. – 6 pr (12)
3p. – (pr, 1 sbn) x 6 (18)
4p. – (pr, 2 sbn) x 6 (24)
5r. – (pr, 3 sbn) x 6 (30)
6r. – (pr, 4 sbn) x 6 (36)
7-14 rubles. – 36 sbn
15rubleseach. – (ub, 4 sbn) x 6 (30)
16 rubles. – (ub, 3 sbn) x 6 (24)
17r. – (ub, 2 sbn) x 6 (18)
Finish ss, cut the thread, thread the ends and fill tightly with filler.

Body 
1p. – 6 sc in the amigurumi ring (6)
2p. – 6 pr (12)
3p. – (pr, 1 sbn) x 6 (18)
4p. – (pr, 2 sbn) x 6 (24)
5-12r. – 24 sbn
13r. – (ub, 2 sbn) x 6 (18)
14r. – 18 sbn
Finish ss, cut the thread so that there is a long end. Stuff the part with filler. Align the body with the head and sew around the edge of all 18 stitches, adding filler as needed.

Hat 
1p. – 6 sc in the amigurumi ring (6)
2p. – 6 pr (12)
3p. – (pr, 1 sbn) x 6 (18)
4p. – (pr, 2 sbn) x 6 (24)
5r. – (pr, 3 sbn) x 6 (30)
6r. – (pr, 4 sbn) x 6 (36)
7r. – (pr, 5 sbn) x 6 (42)
8-15 rubles. – 42 sbn
16rubleseach. – change the color to white and tie the edge with a crustacean step.
Finish ss, cut the thread, thread the ends.

Pompom (made of fluffy yarn)
1p. – 6 sc in the amigurumi ring (6)
2p. – 6 pr (12)
3-4r. – 12 sbn each
Finish ss, cut the thread so that there is a long end. Stuff the piece with filler and sew to the cap.

Ears (2 parts)
1p. – 6 sc in the amigurumi ring (6)
2p. – 6 pr (12)
3-5r. – 12 sbn each
Finish ss, cut the thread so that there is a long end. lower paws: 1p. – 6 sc in the amigurumi ring (6) 2p. – (pr, 2 sbn) x 2 (8) 3-8r. – 8 sbn each Finish ss, cut the thread so that there is a long end. Stuff the part with filler.

Upper:
1p. – 7 sc in the amigurumi ring (7)
2-7r. – 7 sbn each
Finish ss, cut the thread so that there is a long end. Stuff the part with filler.
Give the legs a flattened shape (fold the edge in half). Sew the edge with the remaining end of the thread, but do not cut the thread after that.

Tail
1p. – 5 sc in the amigurumi ring (5)
2p. – 5 pr (10)
3-4r. – 10 sbn each
Finish ss, cut the thread so that there is a long end. Stuff the part with filler.

Scarf
Type an air chain of the required length (I have 50 VP) and tie one row of sbn (1 column in each VP). At the end, cut off the thread, thread the ends.

Muzzle 
1p. – 6 sc in the amigurumi ring (6)
2p. – 6 pr (12)
3p. – (pr, 1 sbn) x 6 (18)
If necessary, continue to knit according to the rule of the circle to a suitable size.
Finish ss, cut the thread so that there is a long end.
Embroider a nose and a smile with black sewing threads.

Gift
Box:
1p. – type a chain of 8 VP, put the hook in 2 loop and knit a row of 7 sbn,
unfoldknitting2-6p. – 7 sc in straight and reverse rows, as when knitting a bow.

7r. – behind the back wall loop 7 sbn
8-12r. – for both walls 7 sbn
13r. – behind the back wall loop 7 sbn
14-18r. – for both walls 7 sbn
19r. – behind the back wall loop 7 sbn
20-24r. – for both walls, 7 sbn each
Cut the thread so that the long end remains, sew the first row with it and the last one behind the back wall, imitating one more “rib”. Hide the ends of the threads.
Tie a square of 6 rows of 6 sbn each (initial chain of 7 VP), leave the long end of the thread and sew the bottom to the first workpiece with it.
Cut 5 squares out of cardboard and reinforce the bottom and sides of the gift with them to make it smoother and stronger. Add filler or unnecessary thread trimmings inside.

Cover:
1-8r. – tie a square of 8 rows of 8 sbn (initial chain of 9 VP),
9p. – without cutting off the threads, tie the edge of the square (i.e. knit along the perimeter of the square, you get 8 sc on each side, totaling 32 sc on the edge).
10 rub. – (ub, 6 sbn) x 4 (28)
Cut the thread and hide the ends.
Place the lid on the box, tie it with tape or thread if desired.

Assembling a knitted toy amigurmi bear

Place the hat over the workpiece so that the hat covers most of your head. Try on the muzzle, eyes, ears and sew / glue them in the place you like. In the photo, the eyes are between 11 and 14 rows, and the nose is between 10 and 15, if you count from the crown, i.e. without a cap, a very high forehead (therefore, the cap is one-piece, cannot be removed).
After shaping the head, try on the legs and tail, pin them with pins, check that the bear can sit on its own (the tail gives stability to the back) and sew all the details to the body.
Gift, if desired, can be sewn to the paws.
Add blush with dry pastels or blush / shadows, tie a scarf around your neck – done!

• Yarn: sport or DK light weight yarn. (I used Yarnart Jeans)
• Crochet hook: 2 mm- 2.5 mm
• Black embroidery thread
• Fiberfill
• Yarn needles
• Safety eyes size 5-6 mm

Abbreviation

MR– magic ring
sc– single crochet
hdc– half double crochet
inc– increase (2 single crochet in 1 stitch)
dec– decrease (invisible decrease)
BLO– back loop only
slst– slip stitch

Head

Rnd 1. 8 sc in MR (8)
Rnd 2. 8-inc (16)
Rnd 3. (sc, inc)*8 (24)
Rnd 4. (2 sc, inc)*8 (32)
Rnd 5. sc, inc, (3 sc, inc)*7, 2 sc (40)
Rnd 6. (4 sc, inc)*8 (48)
Rnd 7-18. (12 rnds) 48 sc (48)
Insert the safety eyes at round 13,14. 8sc apart
Rnd 19. (6 sc, dec)*6 (42)
Rnd 20. (5 sc, dec)*6 (36)
Rnd 21. (4 sc, dec)*6 (30)
Rnd 22. (3 sc, dec)*6 (24)
Rnd 23. BLO (2 sc, dec)*6 (18)
Rnd 24. (sc, dec)*6 (12)
Rnd 25. 6-dec (6)
Cut the yarn and weave in the end

Scarf

Make 51 chains, sc, 48-hdc, sc (50)
fasten off

Body

Insert the hook into round 23 of the head
(BLO round)
Rnd 1. 24 sc (24) (pic 0)
Rnd 2. (3 sc, inc)*6 (30)
Rnd 3. 30 sc (30)
Rnd 4. (4 sc, inc)*6 (36)
Rnd 5-7. (3 rnds) 36 sc (36)
Rnd 8. (6 sc, dec)*4, 4 sc (32)
Rnd 9-11. (3 rnds) 32 sc (32)
Rnd 12. (2 sc, dec)*8 (24)
Rnd 13. (sc, dec)*8 (16)
Rnd 14. 8-dec (8)
Cut the yarn and weave in the end

Nose

Rnd 1. Make 3 chains, inc, 4 sc in last chain, inc (8)
Rnd 2. inc, 2 sc, 2-inc, 2 sc, inc (12)
Cut the yarn, leave long tail for sewing

Arm*2

Rnd 1. 6 sc in MR (6)
Rnd 2. (sc, inc)*3 (9)
Rnd 3-10. (8 rnds) 9 sc (9)
Cut the yarn, leave long tail for sewing

Leg*2

Rnd 1. 8 sc in MR (8)
Rnd 2. 8-inc (16)
Rnd 3-4. (2 rnds) 16 sc (16)
Rnd 5. 5 sc, 3-dec, 5 sc (13)
Rnd 6. 5 sc, dec, 6 sc (12)
Rnd 7-11. (5 rnds) 12 sc (12)
Rnd 12. 6-dec (6)
Fasten off, leave long tail for sewing to the body with a button.

Ear*2

Rnd 1. 6 sc in MR (6)
Rnd 2. Turn your hook, 1-chain, 6 sc (6)
Cut the yarn, leave long tail for sewing.

Baby teddy is ready.