Materials and tools:

• Mohair Gold yarn (50 g / 250 m) gray, nude thread (20 g / 195 m) for ponytail
• Hook 2.0mm (for mouse), 0.8mm for tail
• 2 buttons (D-1.5 cm, D-1 cm), strong thread 20 cm
• Long needle
• Scissors
• Filler
• Eyes 4 mm
• Iron brush (for fleece) – optional
• Black thread for embroidery of the nose and mouth (you can use a ready-made nose or mold from plastic)
• Wire D 2 mm (5 pieces of about 15-20 cm)
• Nippers
• Awl

Legend:
KA – amigurumi ring ubssn
– decrease from columns with a crochet
prssn – increase from columns with a crochet
ss – connecting column
sb – single crochet
pr – increase
ub – decrease

Head
1 row: 6 sbn in CA
2 row: (1 sbn, pr) x3 (9)
3 row: (2 sbn, pr) x3 (12)
4 row: (1 sbn, pr) x6 (18)
5 row: 2 PRS, PR, 1 PRS, 4 PR, 1 PRS, PR, 8 PRS (24)
6 row: 4 PRS, (PR, 1 PRS) x6, 8 PRS (30)
7-10 rows: 30 PRS (leave marker – thread of a different color, the place where the head is attached to the body)
11-14 rows: 30 sb
15 row: (3 sb, ub) x6 (24)
Insert a button with a strong thread.
16 row: (2 sbn, y b) x6 (18)
At this stage, make tightening under the eyes – we insert a needle with a thread from the back of the head above the first eye, take it under the eye and bring it out above the second eye, take it under the eye and again to the first one. Gradually tighten, repeat 2-3 times. Then we first pull one eye to the back of the head with the same thread, then the second eye, repeat 2-3 times. The eyes can be glued.
We introduce a black thread from the back of the head – we embroider the mouth and nose (the nose can be glued ready-made).
Add filler to the head and continue knitting.
17 row: (1 sbn, ub) x16 (12)
18 row: 6 ub (6)
Pull the loops with a needle and hide the end of the thread inside the head.

Ears (2 parts)
Knit in reverse rows in a semicircle.
We collect a chain of 4 VP.
1 row: from the 2nd loop from the hook: pr, 2 sbn
2 row: cp, 2 sbn, 3 pr, 2 sbn (10)
3 row: cp, 3 sbn, 4 ave, 3 sbn (14)
4 row: vp, 4 sbn, (pr, sbn) x3, pr, 3 sbn (18)
Leave the thread for sewing, pull off the eyelet.
We try on the ears, choose the position, sew in a circle.

Body
1 row: 6 sc in CA
2 row: 6 pr (12)
3 row: (3 sc, pr) x3 (15)
4-5 rows: 15 sc
Attach the head to the body (thread the ends of the thread from the head into the needle, thread into the body, put on a button, tightly pull and tie several knots, cut the ends, leaving about 1 cm).
6 row: (4 sbn, pr) x3 (18)
7 row: 18 sbn
8 row: 14 sbn, pr, pr (put a marker – middle of the tummy), pr, 1 sbn (21)
9 row: 14 sbn, (pr , 1 sc) x2, pr, 2 sc (24)
10-14 rows: 24 sc
15 row: (2 sc, dec) x6 (18)
16 row: (1 sc, dec) x6 (12)
We fill the body tightly.
17 row: 6 kill (6)
Pull with a needle and hide the thread in the body.

Upper leg (2 parts)
1 row: 6 sbn in KA
2-7 rows: 6 sbn
8-9 rows: 3 sbn, 3 sbn (6)
10 row: sbn, pr, 4 sbn (7)
11-13 rows: 7 sbn
Leave the thread for sewing.

Lower leg (2 parts)
1 row: 6 sbn in KA
2-3 rows: 6 sbn
4-5 rows: 3 sbn, 3 sbn (6)
6 row: 1 sbn, pr, 4 sbn (7)
7-8 rows : 7 sbn
9 row: 2 sbn, pr, 4 sbn (8)
10-11 rows: 8 sbn
12 row: 3 sbn, pr, 4 sbn (9)
13-14 rows: 9 sbn
Leave the thread for sewing.

Tail
1 row: 4 sbn in the spacecraft
2 row: 4 sbn
3 row: pr, 3 sbn (5)
4-7 rows: 5 sbn
8 row: pr, 4 sbn (6)
9-16 rows: 6 sbn
17 row: pr, 5 sc (7)
18-25 rows: 7 sc
26 row: pr, 6 sc (8)
27-33 rows: 8 sc
34 row: pr, 7 sc (9)
35-40 rows: 9 sc
41 row : pr, 8 sbn (10)
42-46 rows: 10 sbn
47 row: pr, 9 sbn (11)
48-49 rows: 11 sbn
50 row: pr, 10 sbn (12)
51 row: 12 sbn
Leave the thread for sewing.

We
prepare the assembly of 4 pieces of wire for the legs, for this:
– we smear the middle of the piece of wire and wind the thread about 1.5 cm,
– bend it in half,
– continue wrapping with thread from the beginning along the entire length of the foot (the thread should not protrude beyond the length of the foot), leave the free ends of the wire,
– repeat for all 4 legs,
– insert the wire into the foot,
– bend the legs as desired,
– find a place for the upper legs and for the lower ones, pierce the hole with an awl,
– cut the wire, leaving 1.5 cm each free ends,
– we insert into the body,
– we sew the legs in a circle,
– we bend the last segment at the end and insert the curved end into the tail,
– sew the tail in a circle.

Cap
row 1: dial a chain 70 VP, connect ss in a ring
2 row: 2 VP, 70 PRS, SS
3 row: 2 VP, 21 PRS, UBSSN, 21 PRS, UBSSN, 22 PRS, UBSSN, SS (67)
4 row : 2 VP, UBSSN, 64 PRS, SS (66)
5 row: 2 VP, (20 PRS, UBSSN) x3, SS (63)
6 row: 2 VP, (19 PRS, UBSSN) x3, SS (60)
Next evenly reduce 3 loops to 24 rows (6)
Leave the thread for sewing on the pompom.
Tie the cap with white thread and, if desired, trim with fluffy.
Shade the eyes and ears a little with dry pastel.

Mittens (2 parts)
1 row: 5 sb in the spacecraft
2 row: 5 pr (10)
3 row: (1 sb, pr) x5 (15)
4-7 rows: 15 sb
Next, we knit a finger on the mitten in rotary rows:
1. 3 sc
2. ch, 3sbn
3. sc 2
4. 1 sc
5. sn
6. etc.
7. sn, 1 sc, etc. (3)
folded in half finger, remove the hook and introduce it into the bottom fingers cling loop and is pulled in the base of the finger (ss) and then we continue to knit the mitten.
8 row: 12 sb, bend the finger down and continue to knit 3 more sb at the base of the second half of the finger (15)
9-10 rows: 15 sb Cut the
thread, sew the finger.
Change to red thread:
11-12 rows: 15 sbn
We do not cut the thread, but knit it to connect with the second mitten (the number of loops depends on the distance from the mitten to the mitten).
We knit the second mitten according to the same pattern and at the end we sew it to the chain from VP.

Bag
You can put a gift or fill with filler.
For Santa’s bag, we need a red cloth measuring 13x9cm (taking into account 0.5cm for seams and hem).
Make a hem and stitch on the 13 cm side.
Fold in half with the wrong side and sew on both sides (you can use your hands, you can use a sewing machine).
Stitch corners, cut off excess, turn out.
Sew on a lace or elastic for a tie, decorate with beads.

Decoration
Cut out the leaves from the remnants of green felt.
Glue the leaves and beads.